REPON SLIDES

banner01

Content

products

  1. Home
  2. Products

profile

Mounting
Side Clearance
height
Loading
Size
feature
surface Treatment
  • Clear Zinc
  • Black Zinc
  • GI
  • Powder coating on drawer frame
  • Anodizing
Option
Packaging

Quick Installation Guide

,

smile

Read The Quick installation guide first before installation

 
  • Recommended screws for fixing - M4 machinery screw (for inddustrial aplication) or #8 pan head screws. Each side of slide requires at least 6 screws.
Quick installation guide
 

Technical Specifications for drawer or pull-out shelf

  • Drawer or pulling-out shelf must be at least 9.8 mm narrower than cabinet opening on each side. (DIM A)
  • Bottom of drawer or pulling-out shelf bottom shall have 6.4 mm or 1/4" minimum clearance from the bottom of cabinet. (DIM B)
  • Mark a center line from the bottom of cabinet with the proper height (H). (DIM C)
  • Mark a center line from the bottom of drawer with the proper height (H-6.4 mm). (DIM D)
Quick installation guide
Step 1
Install cabinet member to cabinet
  • Press the release latch down to disconnect the drawer member. (Figure1-1)
  • Align the center line of cabinet member to the determined center line (*H), and place slide 2 mm backward from cabinet opening. (Figure 1-2)

    * The height (H) must not be shorter than 35.3 mm.

  • Fix the slides through holes on cabinet member. Leave the screw loose for final adjustment. Move the ball retainer back and forth, and make sure no screw is bound.
Step01
Step 2
Install drawer member to drawer
  • Align the center line of draw er member to the determined center line (H-6.4 mm), and place drawer member 2 mm backward from the drawer front or the pulling-out shelf edge. Shall the silencing Cushion is used, place drawer member 5.2 mm backward. (Figure2-1)
  • Fix the drawer member through holes. Leave the screw loose for final adjustment.
Step02
Step 3
Insert drawer into cabinet and adjustment
  • Make sure the bearing retainers are fully forward. Insert drawer member into the Cabinet member, release the lock open by press the latch, and then close the drawer completely. (Figure3-1)
Step03

Final Adjustment.......

Try to open and close the drawer to see if lock open and slides function correctly. If so, secure the screws and install additional screws as necessary.

★This instruction is for reference only. It may vary due to different applications.

Footer